Fire Helmet Camera© Adjustable Bracket Instructions

A – Place the 2 small flathead screws thru the beveled holes of the camera holder.

B – Now place the camera holder (with flathead screws) thru the helmet clamps slotted holes and tighten down with the 2 washers and nuts. Before tightening, you can adjust the angle of the camera holder on the bracket.

C – Now thread the 2 Phillips screws with the locking nuts and screw them into the threaded holes of the helmet bracket. The bracket can be placed on the top or bottom of traditional or modern style fire helmets.

(In some instances, you might need to place a shim under the bracket on the helmet side to level.)